Power and weight are two chief considerations when selecting a power amp, and the Peavey IPR2 3000 power amplifier is impressive in both of those categories. At just over eight pounds, its 1750 watt bridged two ohm output is impressive indeed.
IPR2 power amplifier, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.
2- Channel independent fourth-order Linkwitz-Riley crossovers
Revolutionary IPR class D topology
Combi XLR 1/4" inputs
Speakon output connectors
Detented input controls
1750w at 2 ohms/950w at 4 ohms/525w at 8 ohms
Order today to lighten your load and increase your output.
IPR2 3000 DSP Power Amp
Rated Power 2ch x 2 ohms: 1750 watts 20ms repetitive burst / 450 watts 1% THD both ch. driven @ 1kHz
Rated Power 2ch x 4 ohms 950 watts 20ms repetitive burst / 900 watts 1% THD / 815 watts 0.2% THD, both ch. driven @ 1kHz
Rated Power 2ch x 8 ohms 525 watts 20ms repetitive burst / 500 watts 1% THD / 430 watts 0.15% THD, both ch. driven @ 1kHz
Minimum Load Impedance: 2 ohms
Maximum RMS Voltage Swing: 70 volts
Frequency Response: 20 Hz - 22 kHz; +/-.05dB @ 4 ohms
20Hz - 20kHz 2ch x 2 ohms <0.15% @ 1,200 watts 20 Hz to 3 kHz, decreasing to 1,100 watts @ 20 kHz, both ch. driven
20Hz - 20kHz 2ch x 4 ohms <0.15% @ 650 watts 20 Hz to 20 kHz, both ch. driven
20Hz - 20kHz 2ch x 8 ohms <0.15% @ 375 watts 20 Hz to 20 kHz, both ch. driven
Input CMRR: > - 76 dB @ 1 kHz
Voltage Gain: x 37.75 (+31.5 dB)
Crossover: Adjustable High Pass and Low Pass filter per channel. Filter Types: 12dB/oct 2nd order, 18dB/oct 3rd
order, 24dB/oct 4th order Butterworth and 24dB/oct 4th order Linkwitz -Riley
Crosstalk: > -68 dB @ 1 kHz @ 400 watts power @ 8 ohms
Hum and Noise: > -92 dB, "A" weighted referenced to rated power @ 4 ohms
Slew Rate: > 12V/?s
Damping Factor: (8 ohms) > 255:1 @ 20 Hz - 1 kHz @ 8 ohms
Input Sensitivity: 1.54 volts +/- 3% for 1 kHz 4 ohm rated power, 1.47 volts +/- 3% for 1 kHz. 2 ohm rated power
Input Impedance: 12 kilohms, balanced and 6 kilohms unbalanced
Current Draw @ 1/8 in VA (watts): 960 (535) @ 2 ohms, 615 (315) @ 4 ohms, 400 (200) @ 8 ohms
Current Draw @ 1/3 in VA (watts): 2065 (1360) @ 2 ohms, 1215 (735) @ 4 ohms, 740 (420) @ 8 ohms
Idle Consumption: 160VA, 75 watts
Cooling: Temperature dependent variable speed 80 mm DC fan
Controls: 2 front panel detented attenuators, push-button navigation encoder to navigate through the menus on theLCD screen for input mode, parametric EQ, crossover HPF, LPF. and more.
Indicator LEDs: Five LED indicators per channel: Active, Signal, DDT, Temperature and DC
Protection: Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors: Dual combination 1/4" XLR, dual male XLR input thru, two twist lock connectors
Construction: 0.062" aluminum
Dimensions: 3.5"x19"x 10.5" behind front panel + 0.6" for handle
Net Weight: 5.62 kg (12.4 lb.*)
Gross Weight: 6.80 kg (15.0 lb.)
Custom Guitar's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling
and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a
complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
Unexpected and unintentional spills, drops and cracks
Normal wear and tear
Dust, internal heat and humidity
Other plan features include:
For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
For products under $200 experiencing the above failures, a Custom Guitar's Friend gift card will be issued for the full price of the product + tax.
Shipping fees covered if required for repair or replacement
Plans are transferable in the event merchandise is sold
Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.