Radial Tonebone Plexitube + Tonebone Trimode Display.
*This is a Radial retail display pedal board. Featuring the Radial Tonebone Plexitube and the Radial Tonebone Trimode. These pedals do not have the metal back plates (See Photos) which usually protect the inner electronics of the pedals, but both are fully functional and sound great.
Pure British Tube Tone in a Compact Pedal!
Plexitube is a two channel tube distortion pedal that combines the
natural warmth and harmonic generation of a 12AX7 tube with the control
and saturation of Radial's unique multi-stage solid-state drive circuit.
This combination provides incredible gain with tons of overtones and,
when combined with our unique passive-interactive EQ, produces four
generations of Marshall Plexi tones worthy of a Shakespearian Ode. Build
like a little Sherman tank, yet compact enough to fit on your
pedalboard, the Tonebone Plexitube pedal is among the world's most
compact tube distortions. The Plexitube uses a proprietary hybrid
circuit that combines the control of a dual-stage solid-state front end
with the natural harmonic generation and warmth that only a real live
12AX7 tube can generate. The Plexitube may just be the ultimate in
guitar distortion! Radial Tonebone Plexitube Tube Distortion At-a-Glance:
Built for the Stage
Just as you'd expect form Radial, the Plexitube is built for very low
self-noise. The tube is mounted on its side to keep the pedal profile
down for easy pedal action and is powered by an external 15VDC supply.
Power is internally regulated and filtered to eliminate noise. To
further reduce self-noise a unique ground plane circuit topology is
employed that makes Tonebone tube distortion pedals the quietest of all
pedals in their class.
Built for the Stage
The Tonebone Plexitube is built tough. The 14-gauge steel construction
reduces stress on the PC board and a baked enamel finish will keep your
Tonebone Plexitube looking great for years! Designed to enhance on-stage
functionality, the Plexitube features two distinct distortion channels
for on-the-fly transition between rhythm and lead settings. Channel-1
has been optimized for rhythm with chunk rhythm tones and scooped out
mids for a thunderous wall-of-sound and complete world domination.
Channel-2 is optimized to produce razor-sharp cut for solos and
sustaining mids that are so smooth, they can make a grown man cry. This
is augmented with an effects loop that can automatically turn your delay
on for leads. No tap dancing!
Versatile Radial Tonebone Plexitube Tube Distortion Features:
The Plexitube is your 'Plexi-in-a-box'! Just plug the Plexitube output
into your amp to open up a world of tube driven British rock tones. The
separate trim, drive, contour and EQ controls give you instant command
of both rhythm and lead distortion settings as well as a true bypass
mode that ensures that nothing gets in the way of your pure
guitar-to-amp tone. When the Plexitube is off, true-bypass connectivity
ensures the natural tone of your guitar goes directly to your amp
without obstruction or a tone robbing load. But that's just the
beginning because you've also got a foot-switchable effects loop at your
disposal thats there when you need it and out of your clean signal path
when you don't. You will be amazed at the breadth and scope of the
sounds just waiting to be discoverd in this truly versatile pedal!
12AX7 equipped tube distortion
Clean, rhythm and lead in one pedal
Insert loop on lead channel for effects
True bypass clean for natural tone
Huge chunky rhythm settings with scooped mids
A Triple Threat Distoriton Pedal!
The Tonebone Classic
Trimode is Radial's most progressive pedal ever! Trimode gives you
instant access to superb clean, rhythm and lead tones without tap
dancing. And tone you will receive. Based on the heritage of America's
finest tube amplifiers, the Trimode delivers five generations of tone
from the slight overdrive of early rock & roll to blistering power
tones of today's high gain amps. Following the award-winning Tonebone
Classic, the Trimode combines the warmth and even harmonics of a 12AX7
tube with Radial's unique dual-stage drive for the natural dynamics and
response of a vintage tube amp. The Trimode may be the closest thing you
can get to a real tube amp in a pedal! Radial TriMode Tube Distortion At-a-Glance:
Three Modes of Operation
Easy to use
Three Modes of Operation
As the name implies, Trimode has three settings: 'True Bypass Clean
Mode' for the natural tone of your guitar - direct to your amp; 'Rhythm
Mode' with input drive, output gain and our unique Interstage drive to
precision-tune the mayhem you are about to unleash; and 'Solo Mode' with
its own input drive, output gain, and mid boost for days of sustain.
Trimode goes even further with a built-in effects loop on the solo
channel that lets you instantly engage a delay or pedal chain with a
single foot action. Trimode: 3 modes, huge tone and amazing dynamics -
finally, a pedal that sounds and feels like a real tube amp!
Imagine having a second 2-channel amp in front of your guitar amp. How
cool would it be to have individual input drive and output level control
on each channel so that you could dial in the perfect amount of grit?
Now imagine being able to adjust the mid boost separately on your solo
channel to increase sustain for those violin type solo tones. How about
automatically introducing a delay as soon as you go from crunchy rhythm
tones to Star Spangled solos? This is Trimode.
Easy to use Radial TriMode Tube Distortion Features:
The Radial Trimode offers an amazing combination of simplicity and
functionality with innovative, well thought-out features accessible
through intuitive controls and I/O options. The two footswitches provide
for easy toggling between modes and large LED indicators allow instant
at-a-glance monitoring of the Trimode's status. Separate drive, level
and mid-boost control for each distortion channel gives you the power to
easily set up exactly the distortion sounds you want, then toggle
between them with no tap-dancing! The overall Top End and Drive Gain
switches together with variable High and Low EQ controls and the
'anti-presence' Filter control will guide you to the perfect tone for
your amp/guitar combination. Effects can be connected via the Insert
1/4" send-receive TRS jack and are switched in when you press the
'Toggle' switch to select Ch-2.
True bypass clean mode
Dynamic rhythm distortion mode
Sustaining lead distortion mode
12AX7 tube for natural overdrive tone
Effects loop on lead solo channel
Model:Tonebone Plexitube Tonebone Trimode