The PV 231EQ dual 31-band 2/3-octave graphic EQ features Peavey's legendary low-noise, low-distortion design. The PV 231EQ has center-detented fader controls and offers selectable ±6 dB or ±12 dB gain over frequencies ranging from 20 Hz to 20 kHz and an LED display indicating level. Other features include variable-state low-cut and high-cut filters, XLR balanced inputs and outputs and bypass switches. PV 231EQ filters are set at ISO center frequencies within 3% accuracy.
2 RU dual 31-band
Switchable 12-band or 6 dB boost/cut range
Variable 24 dB low cut filter
Variable 24 dB high cut filter
XLR balanced I/O
Output level LEDs
Bypass switch with status LED
45 mm center-detent control sliders
Whether on stage, in the studio or simply tweaking your home hi-fi system, the PV 231EQ is the EQ for you. Order today!
PV 231EQ Graphic Equalizer
Channels: 2 (stereo)
Bands: 31 per channel
Connectors: XLR balanced inputs and outputs
Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 16 kHz, 20 kHz
Control Range: Selectable +/-12 dB or +/-6 dB
Input Impedance: 50k ohms
Output Impedance: 600 ohms
Maximum Output Level: +21 dB
Level Control: +/- 10 dB
Signal to Noise: >93 dB unweighted
Roll-Off Filters: 18 dB/octave, butterworth
Low-Cut: Variable state (10 Hz to 250 Hz)
High-Cut: Variable state (3 kHz to 40 kHz)
Power Consumption: 15 w
Dimensions 19" W x 3.5" H x 7.625" D (Unpacked)
20.5" W x 5.875" H x 9.625" D (Packed)
Weight 8.5 lbs. (Packed)
7 lbs. (Unpacked)
Custom Guitar's Friend Gold Coverage
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling
and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a
complete "no-worry" solution for protecting your investment.
Gold Coverage Includes:
Unexpected and unintentional spills, drops and cracks
Normal wear and tear
Dust, internal heat and humidity
Other plan features include:
For products over $200, No Lemon Policy applies. If it fails for the same defect 3 times, it is replaced on the 4th breakdown. (Does not apply to failures due to drops, spills, and cracks)
For products under $200 experiencing the above failures, a Custom Guitar's Friend gift card will be issued for the full price of the product + tax.
Shipping fees covered if required for repair or replacement
Plans are transferable in the event merchandise is sold
Plans are renewable on new gear
*Limitations and exclusions apply. See terms and conditions for program details
Term for New Gear begins on date of purchase but does not replace the store return policy or manufacturer coverage.
Displaying reviews 1-4
Back to top
It says "...features Peavey's legendary low-noise..." , but adds a little bit noise when used in +/- 12 dB mode, the noise is gone when used in 6 dB mode. Its an average product, and is cheap. I have used the Behringer 3102, maybe i would have gone for that product instead with its feedback detection system. Anyway, its an okay product, but i may not buy it again.
.Bought this to replace an older very scratchy peavey eq on my FOH run. Don't know if I got a bad one or what but right out of the box this thing adds so much white noise to the signal I might as well be using a noise generator. When all sliders are set to middle (flat), the hiss is terrible. And get this, when I cut the lows from 100hz and lower down, the hiss actually gets louder. Huh? Both channels do the same thing.Sorry Peavey but this thing's a dud and I returned it. I have 3 Behringer 3102's I use on my monitor runs and those things are dead silent. Looks like I'm getting another 3102 for the mains.
.I just bought the Peavey PV 231EQ on 02/04/2011 and put it in my rack. I'm in the process of rewiring the whole set-up with some custom cables. Tonight I finished and tested all of them and when i powered it all up there was a very bad humm being produced so so I started the process of elimination and found it was caused by the EQ. lifting the ground didn't work and either. Its now a week later and today is the first time powered it up. I only had 3 days to return it so gotta find a nees for a noisy EQ
.Just bought this graphic eq... its quite cheap but performs great, clean sounding. The controls are a little bit hard to adjust, not very smooth. Would have been nice if they were LED illuminated or maybe a feedback detecting circuit could have been included. The high pass and low pass filters are quite useful. For this price, you wont find a better eq.